The use of laser engraving machine for beginners and operation skills
1. Preparation
1. Material selection: Before using the laser engraving machine, we must first determine the type of material that needs to be carved, and different materials need different engraving depth and speed.
2. Adjust parameters: According to the selected material, set the corresponding engraving parameters, including power, speed, frequency and focus.
3. Prepare the pattern: make the pattern or text that needs to be printed with the drawing software, and edit and adjust it to ensure that it meets your needs.
Two, operation skills
1. Safe operation: In the use of laser engraving machine, be sure to pay attention to safety, wear protective equipment, avoid touching the laser beam and workbench.
2. Debugging equipment: In the use of laser engraving machine, it is necessary to debug the equipment first, check whether the connection and fixing of the various parts are firm, and whether the flatness and surface treatment of the processed materials are up to standard.
3. Select the mode: Adjust the mode of the laser engraving machine, select the lattice or vector mode according to the need, and adjust according to the complexity of the pattern.
4. Design patterns: design and edit patterns through drawing software and other tools, pay attention to the adjustment of size and color, and ensure that the pattern achieves the best effect.
5. Inspection quality: to inspect the printed products, check whether the clarity and depth of the pattern meet the requirements, and check the damage to the surface of the material.
3. Solving common problems
1. The engraving speed of laser engraving machine is slow, the solution is to check whether the parameter Settings and power are appropriate.
2. The material cutting is slow or the engraving effect is not good, and it is necessary to check whether the laser tube is faulty, whether the laser beam is blocked and whether the lens is clean.
3. If the color of the printed product is uneven or the pattern is distorted, it is necessary to check the power of the laser tube and the quality of the scanning head, and readjust the parameters.
